HOW TO SET UP YOUR EQUIPMENT

setup-silent-disco-headphones

TROUBLESHOOTING

Please remember to take care of the equipment!


- Be gentle when pressing the power on button and changing music channels
- Do not drop the headphones, or roughly pull on the headband
- To adjust volume, scroll the volume wheel and hold until you reach your desired volume

Missing/Damaged headphones: $80 fee
Missing/Damaged transmitter: $150 fee
Missing/Damaged cords: $15 fee
Missing/Damaged containers: $25 fee

    • Make sure each transmitter is plugged in to a power source (e.g. power point) and that they are at least 2 meters away from each other and away from any other radio frequencies to avoid interference

    • Make sure your transmitters are all on a separate music channel, and set to “HI” or “LO”
      *Each transmitter must be on a different channel otherwise they will not work (CH1,CH2,CH3)*
      LO = up to 50 meter distance
      HI = up to 500 meter distance
      Note: walls/obstructions will affect signal

    • Make sure all three music devices (phone, tablet, laptop etc.) are connected and plugged in to the transmitters and music is playing, with the volume turned on

    • Make sure your headphones are turned on, and the volume has been turned up

    • If you are using Spotify or other subscription music services, ensure each device is logged in to its own account, as you may not be able to use the same account for each device

  • Lightly press down on the volume wheel for 5-10 seconds, this will cycle between 3 different modes:
    1) Colour AND Flashing Lights
    2) Colour with NO Flashing Lights
    3) NO Colour and NO Flashing Lights